Products
-
Huawei XSHF for MA5800 16-Port Symmetric 10G GPON Interface Board
The H901XSHF board is an 16-port XGS-PON OLT interface board. It works together with the optical network unit (ONU) to provide XGS-PON access services.
-
Huawei CSHF 16-port XG-PON and GPON Combo OLT interface board H902CSHF
High density and energy saving
High density and low power consumption,supporting 2048 access users
High reliability
Chip-level type b protection (single-homing and dual-homing)and type C protection (single-homing and dual-homing) Swithcing
Real-time rogue ONT detection and isolation,ensuring stable service running -
Huawei CGHF 16-Port XG-PON& GPON Combo OLT N2a Interface Board H901CGHF H902CGHF
Huawei 16-port 10G GPON and GPON combo OLT Interface Board with XGPON & GPON C+ Optical Module
Apply to Huawei MA5800 X2, X7, X15, X17 NG OLT system
Max split radio: 1:256
GPON channel: Tx: 2.488 Gbit/s Rx: 1.244 Gbit/s
XG-PON channel: Tx: 9.95Gbit/s, Rx: 2.49Gbit/s
Interface Type: SC
-
100G Transponder/Converter
The 100G OTN Transmitter supports one QSFP28 client interface and one CFP line-side interface to support single-channel 100Gbps large-grain data transfers. The industry’s most advanced coherent technology and FEC forward error correction coding technology enable high-capacity, long-distance high-performance transmission.
-
200G Muxponder 2x100G converge to 200G
The 100G OTN Transmitter supports one QSFP28 client interface and one CFP line-side interface to support single-channel 100Gbps large-grain data transfers. The industry’s most advanced coherent technology and FEC forward error correction coding technology enable high-capacity, long-distance high-performance transmission.
-
SFP+ Multi-Rate Quad Transponder 10Gbps Repeater/Converter/Transponder
SFP+ Multi-Rate Quad Transponder has 8 SFP+ slots, The device provides a flexible transmission of various protocols, such as 1G/10G Ethernet, SDH STM16/STM64, OTU1/OTU1e/OTU2/OTU2e, Fiber Channel 1/2/4/8/10, CPRI, etc. The SFP+ transponder supports multi-rate functionality with optical data rates from 1Gbps up to 10Gbps; The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion.
-
40G & 100G Muxponder
The 40G&100G Muxponer supports 4x10G↔40G or 4x25G↔100G electrical layer multiplexing/demultiplexing, and converts the multiplexed/demultiplexed optical signals into DWDM standard wavelength optical signals. ith DWDM MUX/DEMUX, multi-channel 100G or 40G services are transmitted in the DWDM system. 40G&100G Muxponder is the lowest cost solution for 100G metropolitan area network DWDM transmission.
-
40G & 100G OEO Converter
40G&100G Transponder supports two 40G or 100G service access. The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion.
-
SFP28 Multi-Rate Quad Transponder 125M~32G Repeater/Converter/Transponder
SFP28 Multi-Rate Quad Transponder has 8 SFP28 slots, The device provides a flexible transmission of various protocols, such as 100M/1G /10G/25G Ethernet, SDH STM1/STM4/STM16/STM64, Fiber Channel 1/2/4/8 /10/16/32Gbps, CPRI, etc.
The SFP28 transponder supports multi-rate functionality with optical data rates from 1Gbps up to32Gbps;The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion. -
Redundant Multi-Rate Dual Transponder 10 Gbps Repeater/Converter/Transponder
This transponder is a 10G fiber to fiber 3R converter repeater and transponder. This transponder supports SFP+ to SFP+ or XFP to XFP fiber connections. 1+1 Automatic optical line Protection Switching is supported for the Line ports. The transponder is protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) between these different optical module types.
-
Blue/Red EDFA Optical Amplifier
Single Fiber Bidirectional EDFA Amplifier models include a Red and a blue port designed for single fiber DWDM Solution. The design of these models is used for single-fiber DWDM transmission systems.
-
Middle stage access EDFA Optical Amplifier-PA Card
With the application of long-distance systems becoming more and more extensive, our company’s self-developed middle stage access (MSA) EDFA, middle stage access (MSA) EDFA can effectively solve the insertion loss caused by DCM and OADM, offset the DCM and OADM bands. The resulting insertion loss reduces the additional degradation of the system OSNR.
