• head_banner

WDM System

  • 100G Transponder/Converter

    100G Transponder/Converter

    The 100G OTN Transmitter supports one QSFP28 client interface and one CFP line-side interface to support single-channel 100Gbps large-grain data transfers. The industry’s most advanced coherent technology and FEC forward error correction coding technology enable high-capacity, long-distance high-performance transmission.

  • 200G Muxponder 2x100G converge to 200G

    200G Muxponder 2x100G converge to 200G

    The 100G OTN Transmitter supports one QSFP28 client interface and one CFP line-side interface to support single-channel 100Gbps large-grain data transfers. The industry’s most advanced coherent technology and FEC forward error correction coding technology enable high-capacity, long-distance high-performance transmission.

  • SFP+ Multi-Rate Quad Transponder 10Gbps Repeater/Converter/Transponder

    SFP+ Multi-Rate Quad Transponder 10Gbps Repeater/Converter/Transponder

    SFP+ Multi-Rate Quad Transponder has 8 SFP+ slots, The device provides a flexible transmission of various protocols, such as 1G/10G Ethernet, SDH STM16/STM64, OTU1/OTU1e/OTU2/OTU2e, Fiber Channel 1/2/4/8/10, CPRI, etc. The SFP+ transponder supports multi-rate functionality with optical data rates from 1Gbps up to 10Gbps; The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion.

  • 40G & 100G Muxponder

    40G & 100G Muxponder

    The 40G&100G Muxponer supports 4x10G↔40G or 4x25G↔100G electrical layer multiplexing/demultiplexing, and converts the multiplexed/demultiplexed optical signals into DWDM standard wavelength optical signals. ith DWDM MUX/DEMUX, multi-channel 100G or 40G services are transmitted in the DWDM system. 40G&100G Muxponder is the lowest cost solution for 100G metropolitan area network DWDM transmission.

  • 40G & 100G OEO Converter

    40G & 100G OEO Converter

    40G&100G Transponder supports two 40G or 100G service access. The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion.

  • SFP28 Multi-Rate Quad Transponder 125M~32G Repeater/Converter/Transponder

    SFP28 Multi-Rate Quad Transponder 125M~32G Repeater/Converter/Transponder

     

    SFP28 Multi-Rate Quad Transponder has 8 SFP28 slots, The device provides a flexible transmission of various protocols, such as 100M/1G /10G/25G Ethernet, SDH STM1/STM4/STM16/STM64, Fiber Channel 1/2/4/8 /10/16/32Gbps, CPRI, etc.
    The SFP28 transponder supports multi-rate functionality with optical data rates from 1Gbps up to32Gbps;The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion.

     

  • Redundant Multi-Rate Dual Transponder 10 Gbps Repeater/Converter/Transponder

    Redundant Multi-Rate Dual Transponder 10 Gbps Repeater/Converter/Transponder

     

     This transponder is a 10G fiber to fiber 3R converter repeater and transponder. This transponder supports SFP+ to SFP+ or XFP to XFP fiber connections. 1+1 Automatic optical line Protection Switching is supported for the Line ports. The transponder is protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) between these different optical module types.

  • Blue/Red EDFA Optical Amplifier

    Blue/Red EDFA Optical Amplifier

    Single Fiber Bidirectional EDFA Amplifier models include a Red and a blue port designed for single fiber DWDM Solution. The design of these models is used for single-fiber DWDM transmission systems.

  • Middle stage access EDFA Optical Amplifier-PA Card

    Middle stage access EDFA Optical Amplifier-PA Card

    With the application of long-distance systems becoming more and more extensive, our company’s self-developed middle stage access (MSA) EDFA, middle stage access (MSA) EDFA can effectively solve the insertion loss caused by DCM and OADM, offset the DCM and OADM bands. The resulting insertion loss reduces the additional degradation of the system OSNR.

  • EDFA Optical Amplifier – Booster Amplifier

    EDFA Optical Amplifier – Booster Amplifier

    EDFA Optical Amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). Integrated VOA can be automatically adjusted to achieve smooth gain spectrum. It can amplify the C-Band signal with or w/o middle stage access (MSA), which brings great flexibility for the network application.

  • DCM Dispersion Compensation Device

    DCM Dispersion Compensation Device

    Huanet optical compensation function with slope dispersion compensation for standard single-mode fiber can DCM (G.652) were dispersion and dispersion slope compensation broad band in the C-band, allowing the system to optimize residual dispersion.  In the dispersion compensation value of 1545nm wavelength dispersion can reach -2070ps / nm.

  • Dispersion Compensation Module (DCM)

    Dispersion Compensation Module (DCM)

    The Dispersion Compensation Modules are building blocks of the HUA6000 Optical Transport System and serve at optical communication nodes to correct the pulse spread phenomenon known as Chromatic Dispersion that reduces the maximal transmission distance of data in optical fibers.

123 Next > >> Page 1 / 3